282 U41117-J-Z125-7-76
History data Global Status
Meaning of the columns:
pos Line number
PV Number of the physical volume
TL Tape Library: Name of the archive
PVG Name of the physical volume group, usually starts at “CLNP”.
state status
The following values are possible for cleaning cartridges:
o___ (“scratch”) when the volume has just been added.
_r__ Read volume, has no more space for additional data. This is the normal
state of a cleaning cartridge.
f___ (“faulty”) when all the cleaning cycles have been used up.
max. count
Initial number of cleaning cycles
used_count
Number of cleaning cycles used
The PLM uses the cleaning cartridges as far as possible in such a way that one
cartridge is used up fully before the next one is started. However, if a number of
cleaning requests are to be carried out at the same time, the cartridges that are
available will also be used simultaneously.
When a specific physical volume is queried (volume number specified in the query box) a
detailed overview is output:
The data for the selected PV is output in the title bar (see page 279).
This is followed by a list of the (valid) logical volumes stored on the PV.
i
To Next Page
Loading...
Need help?
General