60
4. Specify the scanner as a workgroup or domain member.
z For a workgroup
Press the [Workgroup] button, and enter a workgroup name.
Workgroup names may be up to 15 characters long.
The default name is "WORKGROUP".
z For a domain
Press the [Domain] button and enter a domain name.
Domain names may be up to 155 characters long.
5. Press the [OK] button.
The restart confirmation screen appears.
In the following case, the authentication screen appears.
z When specifying the scanner as a domain member
z When changing the name of a scanner that is a member of a domain
1. Enter a user name.
User names may be up to 256 characters long. Check the required
authentication information when adding to a domain, and enter a user
name which can be added to the domain.
2. Enter a password.
Passwords may be up to 256 characters long (case sensitive).
3. Press the [OK] button.
If the user name and password are valid, the restart confirmation
screen appears.
To Next Page
Loading...
