▶
Align the EDSFF SSD with the guide pin (A).
▶
Fasten the EDSFF SSD with three screws (see circles).
Removing an EDSFF SSD from an EDSFF installation frame
▶
Please proceed in reversed order
.
Concluding steps
No steps needed.
7.4 3.5-inch HDD configurations
7.4.1
Overview of configurations
7.4.1.1 Configuration with up to four HDD modules
The HDD bays can be equipped with 3.5-inch HDD modules or 2.5-inch
HDD/SSD modules, see "2.5-inch HDD/SSD and 3.5-inch installation
frame" on page
123
.
Figure 46: Numbering of the HDDs
Position Logical drive
number
ServerView RAID Manager display
name
[0] 0 Vendor Product (0)
[1] 1 Vendor Product (1)
[2] 2 Vendor Product (2)
[3] 3 Vendor Product (3)
Hard disk drive (HDD) / solid state disk (SSD)
RX2530 M6 Upgrade and Maintenance Manual 127
To Next Page
Loading...
