Concluding steps
▶
"Installing a chassis foam" on page 72.
▶
"Installing the air duct" on page
74.
▶
"Reassembling" on page 57.
▶
"Connecting the power cord" on page 62.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
▶
"Verifying system information backup or restore" on page 82.
▶
"Resuming BitLocker functionality" on page 93.
14.4 Front VGA
14.4.1 Installing the front VGA
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
–
hexagon screw driver 5 mm (for front VGA)
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 48.
▶
"Shutting down the server" on page
48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
▶
"Removing the air duct" on page 73.
Front panel
330 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
