4.8 Switching on the server
CAUTION
▶
Before switching on the server, make sure the top cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top cover is removed.
▶
For more information, see "Important information" on page 31.
▶
Press the On/Off button to start up the server.
▶
Ensure that the power-on indicator is lit green.
4.9
Installing the front cover with lock
Figure 18: Installing the front cover with lock (A)
Basic hardware procedures
66 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
