▶
When using a RAID array, add the additional HDD to the RAID array.
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see "Documentation overview"
on page 28.
Concluding steps
▶
If applicable, "Installing the front cover with lock" on page 66.
7.4.3
Removing 3.5-inch HDD modules
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 48.
▶
If the HDD module to be removed is combined into a RAID array
, please
proceed as follows:
Hard disk drive (HDD) / solid state disk (SSD)
130 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
