▶
Insert all dummy modules, see "Installing a 2.5-inch dummy module" on
page 144.
▶
"Reassembling" on page 57.
▶
"Connecting the power cord" on page
62.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
7.5.10 Replacing the SAS expander board
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page 45.
▶
If applicable, "Removing the front cover with lock" on page
48.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
Hard disk drive (HDD) / solid state disk (SSD)
162 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
