Installing the dummy cover
Figure 233: Installing the dummy cover
▶
Insert the dummy cover in a slight angle and push it inward until it engages
at the other side.
Concluding steps
▶
"Reassembling" on page
57.
▶
"Connecting the power cord" on page
62.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
▶
"Resuming BitLocker functionality" on page 93.
▶
"Reconfiguring the backup software solution" on page 84.
13.3.5 Replacing the ODD
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Accessible drives
322 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
