Fujitsu PRIMERGY RX2530 M6

▶
Perform the required procedures described in the preliminary steps of each
upgrade or maintenance task.
▶
Shut down the server.
If the system is running an ACPI-compliant operating system (OS),
pressing the On/Off button will perform a graceful shutdown.
4.4 Disconnecting the power cord
4.4.1 Disconnecting the power cord (AC PSU)


Figure 4: Unlocking the cable clamp of a PSU
▶
Press the cable clamp down until it disengages (1).
▶
Open the cable clamp (2).
▶
Disconnect the power cord from the PSU and remove it from the cable
clamp.
Basic hardware procedures
RX2530 M6 Upgrade and Maintenance Manual 49