▶
"Updating expansion card firmware" on page 83.
▶
"Resuming BitLocker functionality" on page 93
.
9.6.7 Removing the internal RAID controller
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page 75.
▶
If applicable, "Removing the front cover with lock" on page
48.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
Figure 162: Removing the internal RAID riser module
Expansion cards and backup units
242 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
