Installing the new OCP module
▶
Install the OCP module, see "Installing the OCP module" on page 213.
Concluding steps
▶
"Connecting the power cord" on page 62
.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
▶
Inform the customer about the changed MAC addresses, see "Looking for
MAC/WWN/GUID and SAS addresses" on page 95.
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 92.
▶
"Configuring LAN teaming" on page 100.
9.6 Expansion cards and riser cards
9.6.1 Variants of riser modules
There are four variants available:
–
riser module 1 and riser module 3 are identic
–
riser module 2
–
full height riser module
–
internal RAID riser module
Expansion cards and backup units
RX2530 M6 Upgrade and Maintenance Manual 217
To Next Page
Loading...
