Preliminary steps
▶
"Locating the defective server" on page 45.
▶
If applicable, "Removing the front cover with lock" on page
48.
▶
"Suspending BitLocker functionality" on page 75.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
▶
"Locating the defective component" on page 46.
Removing the defective internal RAID controller
▶
Remove the internal RAID controller, see "Removing the internal RAID
controller" on page 242.
Installing the new internal RAID controller
▶
Install the internal RAID controller, see "Installing the internal RAID
controller" on page 234.
Concluding steps
▶
"Reassembling" on page 57.
▶
"Connecting the power cord" on page 62.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
▶
"Enabling replaced components in the BIOS" on page 88.
▶
"Updating expansion card firmware" on page 83.
▶
"Resuming BitLocker functionality" on page 93.
Expansion cards and backup units
RX2530 M6 Upgrade and Maintenance Manual 245
To Next Page
Loading...
