Fujitsu PRIMERGY RX4770 M6 User Manual

Installing the new expansion card
▶
If applicable, install the slot bracket, see "Handling slot brackets" on
page 175.
▶
Install the expansion card, see "Installing the expansion card" on page 194
.
Concluding steps
▶
If applicable, "Installing a riser module" on page 63.
▶
"Reassembling" on page 53.
▶
If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable,"Installing the front cover with lock" on page 61.
▶
"Enabling replaced components in the BIOS" on page 99.
▶
Inform the customer about changed WWN, MAC and SAS addresses, see
"Looking for MAC/WWN/GUID and SAS addresses" on page 106.
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 104.
▶
"Updating expansion card firmware" on page 89.
▶
"Resuming BitLocker functionality" on page 104.
▶
If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
Configuration of network settings should be performed by the
customer. For more information, see
"Note on network settings
recovery".
▶
If applicable, restore LAN teaming configurations, see "After replacing or
upgrading LAN controllers" on page 1
13.
Expansion cards and backup units
204 Upgrade and Maintenance Manual RX4770 M6

Fujitsu PRIMERGY RX4770 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M6
Category	Server
Language	English