Fujitsu PRIMERGY RX4770 M6 - Indicators on Hot-Plug HDD SSD Pcie SSD Modules

16.2.2.4 Indicators on hot-plug HDD / SSD / PCIe SSD modules
Figure 250: Indicators on an HDD / SSD / PCIe SSD module
1 Access indicator 2 Error indicator
Access indicator (1)
Status Description
off The HDD/SSD is inactive.
green on The HDD/SSD being accessed.
Error indicator (2)
Status Description
off No HDD/SSD error detected.
orange on An HDD/SSD error has been detected.
Possible causes:
– The drive is defective and needs replacing.
–
A RAID rebuild process has failed.
– The HDD/SSD module has not been inserted correctly.
flashing orange
slowly
HDD/SSD RAID rebuild is in progress. Data is being
restored after replacing a drive that has been combined
into a RAID array
.
Appendix A
408 Upgrade and Maintenance Manual RX4770 M6