CPU population requirements
–
CPU1 and CPU2 must be populated first as minimum CPU population rule.
–
All CPUs must be of the same type.
–
All CPUs MUST operate at the same Intel
®
Ultra Path Interconnect
frequency and core frequency.
–
Mixing CPUs with different core count is not supportedsupported, e.g.
mixing 8-core and 6-core.
–
Mixing CPUs with different shared cache size is not supported, e.g. mixing
20 Mbyte and 15 Mbyte.
–
Mixing CPUs with different power class is not supported, e.g. mixing 135-
watt and 95-watt.
–
Mixing CPUs of different stepping is not supported.
For system relevant information, see the hardware configurator of your
server available online at the following address:
https://ts.fujitsu.com/products/standard_servers/index.htm
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
1
1.3 Upgrading to 4 CPU configuration
Upgrade and Repair Unit
(URU)
Hardware: 15 minutes
Software: 5 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– T
orx 30 screw driver (for CPU heatsink)
Processor (CPU)
258 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
Need help?
General