Fujitsu PRIMERGY RX4770 M6 - 4.11 Handling the fan cage

▶
Install the riser module into the top system board by holding it at the four
touch points.
Ensure, that the riser module fits in the guiding notches (see circles).
▶
If necessary, connect the cables to the other components.
4.1
1 Handling the fan cage
4.11.1 Removing the fan cage
Figure 22: Removing a fan module
▶
Remove each fan module by pressing the latches (1) (2).
Basic hardware procedures
64 Upgrade and Maintenance Manual RX4770 M6