Fujitsu PRIMERGY RX4770 M6 - Installing the Server in the Rack

▶
Position the cover 2 on the server (1). Notice the recesses.
CAUTION
▶
Take care that all cables are inside the chassis.
▶
Push the cover 2 to the front side using the green touch points (2).
▶
Fasten the cover 2 with the screw (3).
Installing the cover 1
Figure 12: Installing the cover 1
▶
Insert the cover 1 in a slight angle (1).
CAUTION
▶
Take care that all cables are inside the chassis.
▶
Fold the cover 1 down (2).
4.6.3
Installing the server in the rack
CAUTION
At least two people are needed to position the server on the rack rails.
(For Japan, see "安全上のご注意".)
Basic hardware procedures
RX4770 M6 Upgrade and Maintenance Manual 55