Fujitsu PRIMERGY RX4770 M6 User Manual

5.3.7 Enabling the boot watchdog
If the boot watchdog has been disabled for firmware upgrade purposes (see
"Disabling the boot watchdog" on page 82
), it has to be re-enabled to complete
the maintenance task.
Timer settings can be configured in the BIOS or using the iRMC S5 web
interface.
Enabling the boot watchdog in the BIOS
▶
Enter the BIOS.
▶
Select the Management menu.
▶
Under Boot Watchdog set the Action setting to Reset.
▶
Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
Enabling the boot watchdog using the iRMC S5 web interface
▶
Log in to the iRMC S5 web interface.
▶
Select the Settings menu.
▶
Open the Server Management page.
▶
In the Boot W
atchdog group, check the
Enable Boot Watchdog option.
The Enable Boot Watchdog option must be selected.
▶
Select Reset from the Watchdog Action list.
▶
Click Apply for the changes to take effect.
For more information on iRMC settings, see the iRMC user guides.
Basic software procedures
98 Upgrade and Maintenance Manual RX4770 M6

Fujitsu PRIMERGY RX4770 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M6
Category	Server
Language	English