Fujitsu PRIMERGY RX4770 M6 User Manual

▶
"Resuming BitLocker functionality" on page 104
.
▶
If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced expansion card.
Configuration of network settings should be performed by the
customer. For more information, see
"Note on network settings
recovery" on page 212.
▶
If applicable, restore LAN teaming configurations, see "After replacing or
upgrading LAN controllers" on page
1
13.
9.8 GPU cards in riser modules
9.8.1 Installing a GPU card in a riser module
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page 81
.
▶
If applicable,"Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 48.
▶
Remove the corresponding riser module, see "Removing a riser module" on
page 63.
Expansion cards and backup units
214 Upgrade and Maintenance Manual RX4770 M6

Fujitsu PRIMERGY RX4770 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M6
Category	Server
Language	English