▶
"Updating expansion card firmware" on page 89.
▶
"Resuming BitLocker functionality" on page
104.
9.6.2 Removing an expansion card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶
"Suspending BitLocker functionality" on page 81
.
▶
If applicable,"Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 48.
▶
If applicable, "Removing a riser module" on page 63.
Removing the expansion card
Example SAS EP520i RAID controller:
▶
Disonnect the HDD LED cable from the bottom system board.
Expansion cards and backup units
200 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
