Fujitsu PRIMERGY RX4770 M6 - Replacing the Microsd Card

▶
Install the new Dual microSD 64GB Enterprise, see "Installing the Dual
microSD 64GB Enterprise" on page 362
.
Concluding steps
▶
Install the riser module for PCIe slot 10 and PCIe slot 11, see "Installing a
riser module" on page 63.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable,"Installing the front cover with lock" on page 61.
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see "Software
configuration" on page 364.
15.7.5
Replacing the microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶
"Locating the defective server" on page 97
.
▶
If applicable, "Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 48.
▶
Remove the riser module for PCIe slot 10 and PCIe slot 11, see "Removing
a riser module" on page 63.
System board and components
RX4770 M6 Upgrade and Maintenance Manual 369