Fujitsu PRIMERGY RX4770 M6 - Page 322

Figure 199: Installing the COP (C)
▶
Insert the front panel cable in the connector (1).
▶
Press down the locking bar (2).
Concluding steps
▶
"Installing the air duct 2 (bottom system board)" on page
72.
▶
"Installing the top system board carrier" on page
76.
▶
"Installing the air duct 1 (top system board)" on page 71.
▶
Install the riser module for PCIe slot 10 and PCIe slot 11, see "Installing a
riser module" on page 63.
▶
"Installing the fan cage" on page 66.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
▶
"Using the Chassis ID Prom Tool" on page 110.
▶
"Verifying system information backup or restore" on page 88.
▶
"Resuming BitLocker functionality" on page 104.
Front panel
322 Upgrade and Maintenance Manual RX4770 M6