▶
Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
▶
Remove the CMOS battery (2).
CAUTION
Sharp tools such as screw drivers might damage system board
components in case of slipping.
▶
If the CMOS battery cannot be ejected without the help of a tool,
it is recommended to use a tooth pick.
▶
Insert a new CMOS battery of the same type into the socket (3) and (4).
Concluding steps
▶
Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page
59.
▶
"Switching on the server" on page 60.
▶
If applicable,"Installing the front cover with lock" on page 61.
▶
Time and date must be set manually, see "Verifying the system time
settings" on page 100.
▶
"Verifying system information backup or restore" on page 88
System board and components
330 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
