GE Vivid i n - Page 182

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-114 Section 3-10 - Connectivity Setup
13.)Follow the steps below to change the IP-Address settings:
a.) From the IP-Address pull-down menu, select <Modify> to display the IPs dialog box.
b.) From the IPs dialog box, select the server you want to modify, then select Modify.
Figure 3-120 DICOM Server’s Properties Dialog Box
Figure 3-121 Select <Modify>
Figure 3-122 Select the Unit to Modify
Modify
Select server