GE Vivid i n - Page 193

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-125
Follow the Steps Below to Test the DICOM Query/Retrieve Workflow
NOTE: This check uses both Ping and DICOM Ping.
1.) Select QueryRetrieve from the Selected devices list.
2.) Select Check.
- If the test passes, a pop-up dialog is displayed, see left illustration in Figure 3-134.
Select OK to continue. A green check mark to the left of the Selected devices indicates that
the test passed successfully.
Figure 3-133 Check the DICOM Query/Retrieve Workflow
Figure 3-134 Test (Check) Passed
QUERYRETRIEVE
CHECK