GE Vivid i n - Page 198

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-130 Section 3-10 - Connectivity Setup
3-10-7-4 Exporting to MPEGVue
When exporting to MPEGVue, the Media can be one of the following supported types:
•CD
•MOD
• USB Memory stick (disk-on-key)
1.) Insert the required media into the appropriate drive (or USB port), when applicable.
2.) From the main screen, trackball to the Patient button and press SET
.
3.) End the current exam (if still open), and select Patient-List.
The Patient List will be displayed with the following header:
4.) Trackball to the Export softkey in the bottom menu shown below and press SET
.
The Export dialog box opens.
5.) Under Export To: select To MPEGvue in the combo-box on the right, as shown in Figure 3-139.
6.) Click OK.
The Patient List screen is displayed with the following header:
7.) Trackball to the required Patient File and select it by pressing SET
.
To select more than one Patient File from list, use the <Shift> key together with SET
8.) When ready, after the required Patients Files have been selected (highlighted,) press the COPY
button.
Figure 3-139 Export Dialog Box