GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-158 Section 3-10 - Connectivity Setup
The E-mail Dialog box is displayed.
2) Activate the Send Current Image radio button, then click Next.
Note: If it is necessary to send the MPEGVue Player software to the recipient, first complete this
procedure, then proceed to Sending the MPEGVue Player Software by E-mail on page 3-159.
The E-mail address window is displayed.
3) Select an existing recipient address from the drop-down menu, or type a new address in the
Send To field.
Note: Up to 10 addresses can be stored for future selection.
4) Click Next.
Figure 3-168 E-mail Dialog Box
Figure 3-169 E-mail Address Window
To Next Page
Loading...
