GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-166 Section 3-10 - Connectivity Setup
View previous exams from E-mail
1) From the MPEGVue Startup Menu, click on the View previous exams from email button.
The Patient List is displayed, listing all exams received by email:
2) Click on the required examination Exam Date (labelled 1 in the example above) to select and
display images of that exam.
The MPEGVue screen is displayed as shown in the example in Figure 3-162 on page 3-153.
Activate e-Vue
1) From the MPEGVue Startup Menu, click on the Activate e-Vue button.
The Patient List is displayed, listing all e-Vue exams received (refer to Figure 3-180, above).
2) Click on the required examination Exam Date (labelled 1 in the example above) to select and
display images of that exam.
The MPEGVue screen is displayed as shown in the example in Figure 3-162 on page 3-153.
Figure 3-180 MPEGVue Patient List
To Next Page
Loading...
