GE Vivid i n - Page 283

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 4 - General Procedures and Functional Checks 4-35
4-3-4-2 DVD/CD Writer Test
Table 4-24 DVD/CD Writer Test - Recommended
Step Task Expected Result(s)
1
Connect the DVD to the power and to the system (see
DVD/CD-RW Drive on page 3-36). Connect a probe to
the system and power ON the system.
System and DVD connected.
2
Create a new patient for this test.
Note: The term "Test Patient" refers to the newly created
patient.
The system scan and the name of the "Test Patient" is
displayed in the top-left corner of the screen.
3
Holding the probe in the air, press the Record button to
start scanning. Continue recording until approximately
20MB of data is acquired.
The progress bar indicates "full with images or movies".
4
Press <Patient> button and then select End Exam from
the archive menu.
The following message is displayed:
Unsaved image(s). Which do you want to save?
5
Select All.
A progress-bar is displayed showing that the images
are being archived.
6
Press <Patient> button and then select Patients List
from the archive menu.
The Search/Create Patient window is displayed.
7
Select Test Patient and press Export. The Export pop-up is displayed.
8
Place a blank DVD media into the DVD/CD device.
Note: For information on types of media, see
DVD/CD-RW Drive on page 3-36.
9
Select To: CD/DVD Archive and press OK.
A pop-up is displayed with the message:
Current media is not formatted. Do you wish to
format it?
10
Change the label to TEST-1 and press OK. A progress bar is displayed.
11
Press Select All and then press Copy.
Copying begins and the progress bar displays copying
status. At the end, a message confirms the number of
items copied. Details are displayed in the Status field.
12
Press OK to close the message and then press Done.
A progress bar and message are displayed asking you
to wait.
13
Press Alt+E
and select CD/DVD Writable (H:\) from the
menu.
The message Media Ejected is displayed.
14
Remove the DVD from the drive.
15
Delete the Test Patient that was added for the purpose
of this test.
The Test Patient is removed from the patient list.
16
Place the media into the drive and press the Import. The Export pop-up is displayed.
17
Select CD/DVD Archive on the From: list and press OK.
The following dialog is displayed:
IMPORT PATIENT - CD/DVD Archive
18
Press Select All and then press Copy
Copying begins and the progress bar displays copying
status. At the end, a message confirms the number of
items copied. Details are displayed in the Status field.