GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
7-88 Section 7-5 - Monitoring Tests
9.) Check that the sub-test passed and that result values are within the pre-defined Max and Min limits,
as shown in Figure 7-59.
10.)Select the second report (Temperatures); the report is highlighted in the Reports list, and the
corresponding results are shown in the Report window below, as shown in Figure 7-60.
Figure 7-59 View Test Log - Full System Monitoring Test - Fixed Voltages
To Next Page
Loading...
