UCM6200 Series User Manual
If this option is enabled, when a participant joins the conference room,
participant’s name will be announced to all members in the conference room.
Note:
Option “Quiet Mode” and option “Announce Caller” cannot be enabled at the same
time.
If this option is enabled, no authentication is required for entering the conference
room.
Note:
Please be aware of the potential security risks when turning on this option.
If this option is enabled, UCM6200 will play Hold Music while there is only one
participant in the conference room or the conference is not yet started.
Skip Authentication
When Inviting Users
via Trunk from Web
GUI
If this option is enabled, the invitation from Web GUI via a trunk with password
won’t require authentication.
Note:
Please be aware of the potential security risks when turning on this option.
Enable Conference
Schedules Cleaner
If this option is enabled, conference schedules will be automatically cleaned as
configured.
Conference
Schedules Clean
Time
Enter the clean time (in hours). The valid range is from 0 to 23.
Enter the clean interval (in days). The valid range is from 1 to 30.
• Show/hide Conference Schedule Table
Enable this option will allow Web GUI to display scheduled conference in Conference Schedule Table. Please
see figure below.
To Next Page
Loading...
Need help?
General
