GRAPHTEC FC7000 Series - Media on Which Registration Marks Cannot be Detected; If Registration Marks Cannot be Automatically Recognized

ADVANCED FUNCTIONS AND OPERATIONS: Auto Registration Mark Reading Function
6-20
Media on which registration marks cannot be detected
The plotter cannot detect registration marks on the following types of media.
• Transparent media
→ Due to the media’s transparency, the sensor will detect the surface of the
plotter’s writing panel, preventing the accurate recognition of registration
marks.
• Any media that is not white or ink that is not black
→ Use of a colored medium or registration marks of any color other than black
prevents the accurate recognition of registration marks.
• Coarsely textured drawings or media
→ A medium with a stained or wrinkled surface or with faintly plotted registra-
tion marks prevents the accurate recognition of registration marks.
• Improperly secured media
→ If the media thickness exceeds 0.3 mm, the registration marks cannct be
detected.
If registration marks cannot be automatically recognized
Use the Axis Alignment function. See Section 6.23, “AXIS ALIGNMENT Settings”
for details.