xiii
Special Precautions on Handling Blades
Sharp cutter blades are used with this plotter. Handle the cutter blades and holders with care to prevent bodily injury.
Cutting Blades
Cutter blades are very sharp. While handling a cutter blade or cutter pen, be careful to avoid cutting your fingers or
other parts of your body.
Promptly return used blades to the cutter case provided. When the case is completely filled, discard the used blades
together with the case.
Cutter Pens
The tip consists of a sharp blade. Be sure not to extend it too far. Moreover, when you are not using the cutter pen,
make sure that the blade is fully retracted.
After Turning on the Plotter
During the course of turning on the plotter, be sure to observe the following precautions. The pen carriage and loaded
media may suddenly move during the cutting operation, immediately afterward and when setting the plotter's functions.
Keep hands, hair, clothing and other objects out of the vicinity of the pen carriage, grit rollers and loaded media. To pre-
vent operator injury and poor cutting results, be careful not to allow hands, hair, clothing or other foreign objects to
become entangled with the pen carriage or loaded media while the plotter is operating.
.
To Next Page
Loading...
