GRAPHTEC FC7000 Series - Options; Supplies

Specifications: Options
11-3
11.2 Options
11.3 Supplies
Item Model Contents Quantity
Stand ST0058 Stand FC7000-75 1
Basket 75 PG0017 Basket FC7000-75 1
Basket 100 PG0018 Basket FC7000-100 1
Basket 130 PG0019 Basket FC7000-130 1
Basket 160 PG0020 Basket FC7000-160 1
Multimedia stocker 75 RSK0010
Roll Media stocker FC7000-75
*1
*1
Up to three multimedia stockers can be mounted.
1
Multimedia stocker 100 RSK0011
Roll Media stocker FC7000-100
*1
1
Multimedia stocker 130 RSK0012
Roll Media stocker FC7000-130
*1
1
Multimedia stocker 160 RSK0013
Roll Media stocker FC7000-160
*1
1
Item Model Contents
Cutter plunger PHP32-CB09N Used with 0.9-mm diameter cutter blades (CB09UA-5)
PHP32-CB15N Used with 1.5-mm diameter cutter blades, has a built-in spring)
PPA31-CB09 Used with 0.9-mm diameter cutter blades (CB09UA-5)
PPA31-CB15 Used with 1.5-mm diameter cutter blades, comes with one tube of grease1
PPA31-CB15B Used with 1.5-mm diameter cutter blades (CB15U-5SP, CB15U-K30-5SP)
Cutter blade CB09UA-5 0.9 mm diameter, supersteel blade, comes with a spring, for cutting general film
CB15U-5 1.5 mm diameter, supersteel blade, for cutting slightly thick film
CB15U-5SP 1.5 mm diameter, supersteel blade, comes with a spring
CB15UA-2 1.5 mm diameter, supersteel blade, for cutting high-intensity reflective film
CB15U-K30-5 1.5 mm diameter, supersteel blade, for cutting thick materials
CB15U-K30-5SP 1.5 mm diameter, supersteel blade, comes with a spring
CB15UA-K30-2 1.5 mm diameter, supersteel blade, for cutting high-intensity reflective film
CB15UB-2 1.5 mm diameter, supersteel blade, for cutting small text
Pouncing tool PPA33-TP12 1.2 mm diameter, plunger, pin
Water-based
fibertip pen
KF550 Series
Oil-based
ballpoint pen
KB140 Series
Oil-based
ballpoint pen
plunger
PHP31-BALL
Disposable ink
pen
SD Series 0.2 diameter -0.5 mm
Ink pen plunger PHP32/33/34-INK
Loupe PHP61-LOUPE Pen-type loupe with a x6 magnification ratio
Cross-cutter
blade
CT01H
CT02U Supersteel