xii
PREFACE
Thank you for choosing a Graphtec FC7000 Series plotter. The FC7000 Series plotters employ a digital servo drive
system to achieve high-speed and high-precision cutting. In addition to cutting marking film and othereop media, an
FC7000-series plotter can also be used as a pen plotter. To ensure high cutting quality and optimal productivity, be
sure to read this User's Manual thoroughly prior to use.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, without the prior written permission of Graphtec Corporation.
(2) The product specifications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your sales repre-
sentative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make other com-
ments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for dam-
ages resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or registered
trademarks of their respective companies.
Copyright
This User’s Manual is copyrighted by Graphtec Corporation.
To Next Page
Loading...
