Out of the Box: Assembling the plotter
1 - 6
FC7000-100/130/160 (stand provided)
Assemble the stand, attach the media bracket to the stand, and then mount the
plotter on the stand.
The stand and the media bracket are made up of the following parts.
ASSEMBLING THE STAND
The mounting direction is different for the front loading and the rear loading
models.
Base assembly x 2 Allen wrench
(for M5 screws) x 1
Center bar x 1Stand side bar x 2 Socket head cap screw
(M5) x 20
Stock roller x 2
Media stocker x 2
<Front loading>
<Rear loading>
To Next Page
Loading...
