GRAPHTEC FC7000 Series - Blade Application and Features

Cutter Blades and Cutter Pens: Blade Application and Features
2 - 2
2.1 Blade Application and Features
Individual cutter blades have a variety of features. Select the optimal cutter blade
to suit the medium to be cut.
WARNING: To avoid bodily injury, handle the cutter blade with care.
Blade part
no. and type Diameter
Plunger part
no. Applications and features
CB09UA 0.9 mm PHP32-CB09N Standard blade for cutting color adhesive media. Suit-
able for cutting media up to 0.25 mm thick. Maximum cut-
ting distance of approximately 4000 m.
CB15U 1.5 mm PHP32-CB15N For cutting media which is too thick for the CB09UA
blade to handle. Suitable for cutting media from 0.25 mm
to 0.5 mm thick.
CB15UA 1.5 mm PHP32-CB15N For cutting high intensity reflective media.
CB15UB 1.5 mm PHP32-CB15N For cutting small characters on mono-vinyl chloride
media. Suitable for cutting small size characters that are
less than 10mm.
CB15U-K30 1.5 mm PHP32-CB15N
or
PHP32-CB15
For cutting sandblast rubber. The sharply angled point
provides a longer cutting edge. Suitable for cutting mate-
rial from 0.05 mm to 1.5 mm thick.