Cutter Blades and Cutter Pens: Cutter Pen Nomenclature
2 - 3
2.2 Cutter Pen Nomenclature
The plotter cuts using a cutter blade mounted in a cutter-pen plunger. There are
two different cutter-pen plunger s to suit the diameter of the cutter blade to be
mounted (the 0.9-mm cutter-pen plunger is provided as a standard accessory). Be
sure to mount the cutter blade in the corresponding cutter-pen plunger.
WARNING: To avoid bodily injury, handle cutter blades with care.
Cutter blade
Plunger cap
Plunger
Blade-length adjustment knob
(Blue: For 0.9-mm-diameter blades)
(Red: For 1.5-mm-diameter blades)
To Next Page
Loading...
