GRAPHTEC FC7000 Series - Main Specifications

Specifications: Main Specifications
11-2
11.1 Main Specifications
FC7000-75 FC7000-100 FC7000-130 FC7000-160
CPU 32-Bit
Configuration Grit-rolling plotter
Drive Digital servo
Max. Cut Area (expanded
mode)
50m x 762 mm
(Expanded mode)
50m x 1067 mm
(Expanded mode)
50m x 1372 mm
(Expanded mode)
50m x 1626 mm
(Expanded mode)
Guaranteed precision cutting
area
*1
*1
When the optional basket and Graphtec-specified media are used.
10m x 742 mm 10m x 1047 mm 10m x 1352 mm 10m x 1606 mm
Mountable media width Max. 920 mm, Min. 50
mm
Max. 1224 mm, Min.
50 mm
Max. 1529 mm, Min.
50 mm
Max. 1834 mm, Min.
50 mm
Max. cutting speed (Axial) 148.5cm/sec (45 ips)
Specifiable speeds 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90, 100, 105 cm/sec
Cutting Pressure 48 steps, 0.196-5.88N (20-600gf)
Min. character size 3mm (0.125 in.) alphanumeric Helvetica med. Font
Mechanical resolution
0.005mm
Programmable resolution
GP-GL: 0.01/0.05/0.025/0.01mm, HP-GL: 0.025mm
*2
*2
HP-GL is a registered trademark of Hewlett-Packard Company.
Repeatable accuracy
*1
Max. 0.1 mm/in unit of 2 m (excluding media shrinkage)
Number of cutters/pens
1 (2 for the optional 2-pen models)
*3
*3
The 2-pen unit is a factory-installed option. It cannot be retrofitted.
Pen types Water-based fiber-tip, oil-based ballpoint, ceramic, and disposable ink pens
Pouncing tool type
Pouncing tool: PPA33-TP12, 1.2-mm pin diameter)
*4
*4
The PPA32-TP12 pouncing pen cannot be used.
Compatible media Mono-vinyl chloride media, fluorescent media, and media for illuminated displays, high reflec-
tive media, up to 0.25mm thick, Sandblast rubber up to 1mm thick
*5
*5
The CB15UA cutter blade and a reinforced backing sheet must be used when cutting high-intensity
reflective film.
Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick
Standard interfaces RS-232C/USB (Auto switching)
Buffer memory 2 MB
Resident command sets GP-GL/HP-GL(Control panel switching)
LCD Panel LCD 20x4 - Supports 7 languages: with amber backlight
Power supply 100-240VAC/50-60 Hz (Auto switching)
Power consumption 140VA max.
Operating environment Temperature: +10º C to +35º C
Humidity: 35% to 75% (non-condensing)
Guaranteed accuracy
environment
Temperature: +16º C to +32º C
Humidity: 35% to 70%(non-condensing)
External dimensions without
stand
1260 x 402 x 477mm 1560 x1210 x 715mm 1860 x 1210 x 715mm 2120 x 1210 x 715mm
Weight 29 kg 43 kg
(including stand)
51 kg
(including stand)
59 kg
(including stand)