ADVANCED FUNCTIONS AND OPERATIONS: Setting the PAPER-WEIGHT Function
6-36
4Press the F3 key (OTHER SETUPS). The following menu appears.
5Press the F4 key (PAPER-WEIGHT). The following menu appears.
6 The asterisk “*” indicates the currently selected setting.
To enable the PAPER-WEIGHT function, press the F3 key (ON).
To disable the PAPER-WEIGHT function, press the F4 key (OFF).
7Press the ENTER key to register your setting.
8Press the NEXT key to return the plotter to Ready status.
This setting is retained in the plotter’s internal memory even when the power is
turned off.
MARK SIZE>
SENSOR OFFSET ADJ>
AXIS ORIGIN OFFSET>
PAPER-WEIGHT>
PAPER-WEIGHT
ON*
OFF
To Next Page
Loading...
