BACK GROUND SETTINGS: Setting the Background Settings
8-6
3 At the LANGUAGE SELECTION menu, use the (▲▼) POSITION keys to select
the desired language and then press the ENTER key.
At the CROSS CUT PRESSURE menu, use the (▲▼) POSITION keys to
increase or decrease the value and then press the ENTER key.
For all other displays, press the F3 or the F4 key to move the asterisk to your
desired choice, and then press the ENTER key. The asterisk indicates the
currently selected setting. If you do not wish to change the currently displayed
setting, press the NEXT key to move to the next menu.
4 Turn off the power off when all the settings are completed.
These settings are retained in the plotter’s memory even when the power is
turned off.
To Next Page
Loading...
