H3C WX Series User Manual

108
%Format flash: completed.
Example 2:
Format the CF card using the FAT16 format.
<Sysname> format cfa0: FAT16
mkdir
Syntax
mkdir directory
View
User view
Default Level
3: Manage level
Parameters
directory: Name of a folder.
Description
Use the mkdir command to create a folder under a specified directory on the storage
medium.
The name of the folder to be created must be unique under the specified directory.
Otherwise, you will fail to create the folder under the directory.
To use this command to create a folder, the specified directory must exist. For instance,
to create folder flash:/test/mytest, the test folder must exist. Otherwise, you will fail to
create folder mytest.
Examples
Example 1:
Create a folder named test in the current directory.
<Sysname> mkdir test
....
%Created dir flash:/test
Example 2:
Create folder test/subtest in the current directory.
<Sysname> mkdir test/subtest
....
%Created dir flash:/test/subtest

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English