H3C WX Series

31
Description
Use the service-type command to specify the login type.
Use the undo service-type command to cancel login type configuration.
Examples
Configure the login type as Telnet for the users logging in using the user name of user.
<Sysname> system-view
[Sysname] local-user user
[Sysname-luser-user] service-type telnet
service-type lan-access
Syntax
service-type lan-access
undo service-type lan-access
View
Local user view
Default Level
2: System level
Parameters
None
Description
Use the service-type lan-access command to specify the service type that a user can
use as lan-access (to the user of Ethernet, 802.1x user).
Use the undo service-type lan-access command to cancel the lan-access service
type.
By default, no service is supplied to a user.
Examples
Configure the service type as lan-access.
<Sysname> system-view
[Sysname] local-user user
[Sysname-luser-user] service-type lan-access
sysname
Syntax
sysname string