129
This command will permanently delete the configuration file from the device. Use it with
caution.
Related commands: save, display saved-configuration.
Examples
Delete the configuration file for the next startup of the device from the storage medium
of the device.
<Sysname> reset saved-configuration
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
restore startup-configuration
Syntax
restore startup-configuration from src-addr src-filename
View
User view
Default Level
2: System level
Parameters
src-addr: IP address or name of a TFTP server. The address cannot be an IPv6 address.
src-filename: Filename of the configuration file to be downloaded from the specified
server.
Description
Use the restore startup-configuration command to download a configuration file from
the specified TFTP server to the device and specify the configuration file as the startup
configuration file to be used at the next startup of the device.
Examples
Download configuration file test.cfg from the TFTP server whose IP address is 2.2.2.2, and
the configuration file is to be used at the next startup of the device.
<Sysname> restore startup-configuration from 2.2.2.2 test.cfg
Restore next startup-configuration file from 2.2.2.2. Please
wait..............
finished!
To Next Page
Loading...
Need help?
General
