H3C WX Series User Manual

66
password: Login password. You can input this argument after the username argument
plus a space; or you can input this argument when the “Password:” prompt appears
after you input the username and then press Enter.
Description
Use the user command to relog in to the currently accessed FTP server with another
username.
Before using this command, you must configure the corresponding username and
password on the FTP server; otherwise, your login fails and the FTP connection is closed.
Examples
User ftp1 has logged in to the FTP server. Use username ftp2 to log in to the current FTP
server. (Assume that username ftp2 and password 123123123123 have been configured
on the FTP server).
 Method 1
[ftp] user ftp2
331 Password required for ftp2.
Password:
230 User logged in.
[ftp]
 Method 2
[ftp] user ftp2 123123123123
331 Password required for ftp.
230 User logged in.
[ftp]
verbose
Syntax
verbose
undo verbose
View
FTP client view
Default Level
3: Manage level
Parameters
None

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English