130
save
Syntax
save [ file-url | [ safely ] ]
View
Any view
Default Level
2: System level
Parameters
file-url: File path, where the extension of the file name must be .cfg.
safely: Sets the configuration saving mode to safe. If this argument is not specified, the
configuration file is saved in fast mode.
Description
Use the save file-url command to save the current configuration to the specified
configuration file, but the system will not specify the file as the startup configuration file
for the next system startup. If the file specified by file-url does not exist, the system will
create the file and then save the configuration to the file.
Use the save [ safely ] command to save the current configuration to the root directory
of the storage medium, and specify the file as the startup configuration file for the next
system startup.
Related commands: reset saved-configuration and display current-configuration (in File
Management in the Fundamentals Command Reference); display saved-configuration
(in Basic System Configuration in the Fundamentals Command Reference).
Examples
Example 1:
Save the current configuration file to the specified directory, but do not specify the
configuration file as the configuration file for the next startup.
<Sysname> save test.cfg
The current configuration will be saved to flash:/test.cfg. Continue? [Y/N]:y
Now saving current configuration to the device.
Saving configuration flash:/test.cfg. Please wait...
............
Configuration is saved to flash successfully.
Example 2:
Save the current configuration file to the root directory of the storage medium, and
specify the configuration file as the configuration file for the next startup.
To Next Page
Loading...
Need help?
General
