H3C WX Series User Manual

15
Parameters
None
Description
Use the display command-alias command to display defined command aliases and
the corresponding commands.
Examples
Display the defined command aliases and the corresponding commands.
<Sysname> display command-alias
Command alias is enabled
index alias command key
1 show display
display history-command
Syntax
display history-command
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display history-command command to display commands saved in the history
buffer.
The system saves validated history commands performed last in current user view to the
history buffer, which can save up to 10 commands by default. You can use the history-
command max-size command to set the size of the history buffer.
Related commands: history-command max-size.
Examples
Display validated history commands in current user view (the display information varies
with configuration).
<Sysname> display history-command
display history-command
system-view
vlan 2

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English