H3C WX Series User Manual

141
Table 13 display device manuinfo command output description
Field
Description
DEVICE_NAME
AC name
DEVICE_SERIAL_NUMBER
Device serial number
MAC_ADDRESS
MAC address of the AC
MANUFACTURING_DATE
Manufacturing date of the AC
VENDOR_NAME
Vendor name
display device serial-number
Syntax
display device serial-number
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display device serial-number command to display the serial number and
checksum of the AC.
Examples
Display the serial number and checksum of the AC.
<Sysname> display device serial-number
DEVICE_SERIAL_NUMBER : 210235A045B05B000435
CHECK_SUM : 12SD6D8G
Table 14 display device serial-number command output description
Field
Description
DEVICE_SERIAL_NUMBER
Device serial number in the device manufacturing
information
CHECK_SUM
The checksum after check of the value of the
DEVICE_SERIAL_NUMBER field, with a length of 8
bytes

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English