H3C WX Series

148
Parameters
None
Description
Use the display schedule reboot command to display the AC reboot time set by the
user.
Related commands: schedule reboot at and schedule reboot delay.
Examples
Display the reboot time of the AC.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2006 (in 2 hours and 5 minutes).
The above information indicates the system will reboot at 16:00:00 on March 10, 2006 (in
two hours and five minutes).
display system-failure
Syntax
display system-failure
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display system-failure command to display the exception handling method.
Related commands: system-failure.
Examples
Display the exception handling method.
<Sysname> display system-failure
System failure handling method: reboot
job
Syntax
job job-name