162
clock summer-time one-off
Syntax
clock summer-time zone-name one-off start-time start-date end-time end-date add-
time
undo clock summer-time
View
System view
Default Level
3: Manage level
Parameters
zone-name: Name of the daylight saving time, a string of 1 to 32 characters. It is case
sensitive.
start-time: Start time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros in
the argument can be omitted except for indicating 0 hours.
start-date: Start date, in the format of MM/DD/YYYY (months/days/years) or
YYYY/MM/DD.
end-time: End time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros in the
argument can be omitted except for indicating 0 hours.
end-date: End date, in the format of MM/DD/YYYY (months/days/years) or
YYYY/MM/DD.
add-time: Time added to the standard time of the AC, in the format of HH:MM:SS
(hours/minutes/seconds). The zeros in the argument can be omitted except for
indicating 0 hours.
Description
Use the clock summer-time one-off command to adopt daylight saving time from the
start-time of the start-date to the end-time of the end-date. Daylight saving time adds
the add-time to the current time of the AC.
Use the undo clock summer-time command to cancel the configuration of the
daylight saving time.
By default, daylight saving time is configured on the AC, and the universal time
coordinated (UTC) time zone is applied.
After the configuration takes effect, you can use the display clock command to view
it. Besides, the time of the log or debug information is the local time of which the time
zone and daylight saving time have been adjusted.
To Next Page
Loading...
Need help?
General
